Mobile
Log In Sign Up
Home > english-chinese > "mode converter" in Chinese

Chinese translation for "mode converter"

模变换器
模式变换器


Related Translations:
code converter:  编码变换器代码变换器代码转换程序代码转换器换码器译码器
horizontal converter:  卧式吹炉卧式转炉
autodyne converter:  自差变频器自差式变频器
converter reactor:  (核)转换反应堆转换堆转换反应堆
sign converter:  符号交换器
logarithmic converter:  对数变换器对数转换器
converter steel:  转炉钢
greenfield converter:  格林菲尔德牵切机
cmos converters:  互补金属氧化半导体倒换器
steel converter:  炼钢炉, 吹风转炉
Example Sentences:
1.Design and experiment study of coaxial fin - inserted tem - te11 mode converter
11模式转换器的设计与实验研究
2.The analysis and study in this paper lay a good base for the further study o n the emc of switching - mode converters
为开关型变换器电磁兼容性的进一步研究打下了良好的基础。
3.In the end , principles and methods of optimal design of the emc on full bridge switching - mode converters are analyzed
最后总结分析了开关型变换器电磁兼容性优化设计的原则和方法。
4.According to the characteristics of power electronics conversion technology , detailed analysis and study are made on the emc and emi of full bridge switching - mode converters
针对电力电子变换技术的特点,对全桥开关型变换器的电磁兼容和电磁干扰问题进行了较为深入的分析研究。
5.Usually there are three kinds of design plans of project of the radiation aerial : mode converter + ordinary horn , vlasov aerial and cobra ( coaxial beam - roatating antenna ) aerial
介绍了vlasov辐射器的工作原理。并把vlasov辐射器作为vlasov天线的馈源,设计仿真了两种vlasov天线。
6.A virtual cathode oscillator with an axially extracted te10 or te11 mode has been investigated using the pic code . it can emit microwaves axially through an antenna without mode converter or transition waveguide , making the system more simple and compact . the efficiency of this device can be enhanced by employing premodulation cavity , resonant cavity , feedback mechanism , and virtual cathode formed by two electron beams
本文利用物理分析和粒子模拟的方法研究了轴向提取te10 / te11模虚阴极振荡器,结果表明通过引入预调制腔、谐振腔、反馈端面、双电子束阴极等结构,可以实现结构相对紧凑、束波转换效率较高的轴向提取虚阴极振荡器。
7.By the design of microwave electric field mode and microwave mode converter ( mmc ) , the thesis participated in equipping an domestic microwave plasma chemical vapor deposition ( mpcvd ) equipment with a quartz glass window and water - cooled stainless steel resonant chamber in 2450mhz / 5 kw , introduced the basic machineries and functions of the sub - systems , including microwave system , gas - route system , vacuum system , detecting system and safeguard system
论文通过微波场型和模式转换器的设计,参与建立了一套2 . 45ghz 5kw带有石英玻璃窗、水冷却不锈钢谐振腔的微波等离子体化学气相沉积( mpcvd )系统( mpcvd - 4型) 。论述了包括微波系统、气路系统、真空系统、检测系统和保障系统等结构的组成及基本功能。
8.Consequently , an integrate switch mode power supply with high efficiency and good reliability can be realized by the controller with very few external parts . the fundamental principle of monolithic voltage - mode switching regulator is firstly introduced in this thesis , which is followed by a comparison between voltage - mode and current - mode converters where the pros and cons of both converters are discussed in detail ; next , the global system architecture is proposed upon the design requirements and sub - block circuits are also introduced that focuses on several essential sub - blocks such as amp , wave , pwm control , psc , osc and vref . finally , all sub - circuits and the whole chip circuit are simulated by hspice whose results indicate that the circuit function and performance have perfectly satisfied the design requirements
在论文中,首先阐述了电压控制模式pwm开关电源的基本原理,对比了电流控制模式和电压控制模式,分析了各自的优缺点;随后根据设计要求进行了电路的总体设计,完成了各个子电路的原理分析,电路设计和仿真验证,重点阐述了误差放大电路、三角波发生电路、 pwm控制电路、节能控制电路、振荡电路和基准源电路的分析、设计和验证过程;最后,利用eda软件hspice对整体电路进行了功能仿真验证,仿真结果表明,本文完成了设计工作,达到设计要求。
9.Next , the global system architecture is presented upon the design requirements . due to the fact that constant current is required for driving led , as a result , different from conventional current - mode converter with both output voltage and inductor current feedback loop , the proposed converter adopt dual current feedback loop that both inductor current and output current are detected to provide a stable output current for led
在整体结构设计中,与典型的电流模式采用电感电流反馈环路和输出电压反馈环路不同,本文针对驱动led需要电流稳定的特点,采用双电流反馈环路,即电感电流环路和负载led电流环路,这样就能对负载led电流做出快速响应,通过反馈环路达到稳定led电流的目的。
10.With the software cadence , model establishment and parasitic parameter extraction are made on the main pcb lines of the proposed circuits . equivalent circuit models of common mode combined with differential mode current and noise simulation models are also established on full bridge switching - mode converters . study on the simulation of conducted interference noise is made with the software saber and the effects on the circuits " noise by the main parasitic parameters are also analyzed
在对全桥开关型变换器电路工作原理分析的基础上,建立了全桥开关型变换器主要元器件的电磁干扰参数模型,利用cadence软件对其pcb主要印制导线进行了建模分析和寄生参数的提取,得到了全桥开关型变换器传导干扰的共模、差模噪声电流等效电路模型以及噪声仿真模型,并运用saber软件进行了传导性干扰噪声的仿真研究,分析了主要寄生参数对电路噪声的影响。
Similar Words:
"mode conversational" Chinese translation, "mode conversational operation" Chinese translation, "mode conversion" Chinese translation, "mode conversion interference" Chinese translation, "mode convert" Chinese translation, "mode coupled laser" Chinese translation, "mode coupled operation" Chinese translation, "mode coupler" Chinese translation, "mode coupling" Chinese translation, "mode coupling loss" Chinese translation